Audio-Technica ATW-1501

Wireless guitar system with pedal-style receiver.

Audio-Technica’s System 10 Stompbox digital high-fidelity guitar wireless system combines the advanced 24-bit operation, easy setup and clear, natural sound quality of other System 10 configurations with unique functionality for guitarists, bassists and other instrumentalists. Operating in the 2.4 GHz range, far from TV and DTV interference, System 10 Stompbox offers a rugged, metal, pedal board-mountable receiver with foot switch, two switched TRS balanced 1/4" outputs and an output mode selector. With the tap of a foot, musicians can toggle between outputs (e.g., for switching amps) or mute and unmute one output without muting the other (e.g., for convenient tuning). And a single receiver can be paired with up to eight UniPak® body-pack transmitters, allowing users to easily switch between instruments without having to move a body-pack from one instrument to the next.

System 10 wireless ensures clear communications by providing three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Finally, Space Diversity uses two antennas on each transmitter and receiver to maximize signal integrity.

Each Stompbox system includes an ATW-R1500 Stompbox receiver, an ATW-T1001 UniPak body-pack transmitter with an AT-GcW guitar cable, and hook & loop strips for adding receiver to an effects pedal board. The ATW-R1500 is a digital receiver with sturdy, metal-body construction, easy-to-read digital ID and transmitter battery level displays, and AF Peak and Pair indicator lights.

Features

·         Digital 24-bit/48 kHz wireless operation

·         2.4 GHz range – completely free from TV interference

·         Three levels of diversity assurance: frequency, time, & space

·         Two switched TRS balanced 1/4" output jacks

·         Output mode selector and foot switch to toggle between outputs

·         Multi-pairing function to link a single receiver with up to eight body-pack transmitters

·         Transmitter battery level display on receiver

·         Automatic frequency selection for seamless, interference-free operation

·         Extremely easy operation with instantaneous channel selection, sync, and setup

·         State-of-the-art digital receiver housed in a strong, metal, stompbox-style body

·         Included hook & loop strips for adding receiver to effects pedal board

·         Universal (center + or -) 9v–12v DC input

GENERALSPECIFICATIONS

• Operating Frequencies 2.4 GHz ISM band

• Dynamic Range >109 dB (A-weighted), typical

• Total Harmonic Distortion <0.05% typical

• Operating Range 18.3 m (60') radius, 36.6 m (120') diameter typical

• Open range environment with no interfering signals

• Operating Temperature Range 0° C to +40° C (32° F to 104° F)

• Battery performance may be reduced at very low temperatures

• Frequency Response 20 Hz to 20 kHz

• Depending on microphone type

•  

RECEIVER SPECIFICATIONS

• Receiving System Diversity (frequency/time/space)

• Maximum Output Level 1/4" (6.3 mm), TRS balanced: +12 dBV

• Power Supply 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply

• Dimensions 101 mm (3.98") W x 44 mm (1.73") H x 130 mm (5.12") D

• Net Weight 565 grams (19.9 oz)

• Accessories Included Power supply, hook & loop fastener x2

•  

BODY-PACK TRANSMITTER SPECIFICATIONS

• RF Power Output 10 mW

• Spurious Emissions Following federal and national regulations

• Input Connections Four-pin Locking Connector

• Pin 1: GND

• Pin 2: INST INPUT

• Pin 3: MIC INPUT

• Pin 4: DC BIAS +9V

• Batteries Two 1.5V AA

• not included

• Battery Life >7 hours (alkaline)

• Depending on battery type and use pattern

• Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D

• Net Weight 100 grams (3.5 oz)

• without batteries